+ Reply to Thread
Results 1 to 8 of 8

Thread: I Got Me A MERV

  1. #1
    Join Date
    Jul 2007
    Location
    The Hills Of Maine
    Posts
    1,209

    Default I Got Me A MERV

    It came today
    Its a pretty cool little truck checked it over tweeked the suspension to the way I like to see my truck set up.
    When it showed up.





    After tweeking




    Weather is nasty but what the helz its water proof so I took it out and run er.
    Snow and sleet flying I put in just one pack to try iy out on the 6 cell and :yahoo









    Done my first much needed mod
    Water relief holes in the tires.



    2 holes per tire across from each other works great.

    And a poser shot, impressed with the articulation



    OK so I like a mini now ROFL

    Shelf Queens Are For Sissies
    BRUSHLESS RIPPS, NITRO DRIPPS

  2. #2
    Join Date
    Jul 2008
    Location
    rockland maine
    Posts
    852

    Default Re: I Got Me A MERV

    hay look everyone larry has a REVO I knew you would own a revo one day hahahaha

  3. #3
    Join Date
    Jul 2007
    Location
    The Hills Of Maine
    Posts
    1,209

    Default Re: I Got Me A MERV

    AWWWWWWWW SHUT UP lol

    And what makes it even worse is its a mini.

    Funny thing I like it.

    I never said I didn't like how the revo drove.
    I just said I didnt like the set up of them.

    Shelf Queens Are For Sissies
    BRUSHLESS RIPPS, NITRO DRIPPS

  4. #4
    Join Date
    Jul 2007
    Location
    The Hills Of Maine
    Posts
    1,209

    Default Re: I Got Me A MERV

    OK no video but unplanned upgrades lol
    Thanks Turbo (from BYT)

















    Now for adjustable links

    Shelf Queens Are For Sissies
    BRUSHLESS RIPPS, NITRO DRIPPS

  5. #5
    Join Date
    Feb 2007
    Location
    SWANNEE GA
    Posts
    1,620

    Default Re: I Got Me A MERV

    Oh my larry am glad to see ya in the 90 s lol dude they are a blast i had 2 keep them for a month and had to move on after all the upgrades done enjoy it enjoy it
    YOU SET UP DEALS WITH PEOPLE THEN THEY FORGET ABOUT IT ????? HUMMM

  6. #6
    Join Date
    Jul 2007
    Location
    The Hills Of Maine
    Posts
    1,209

    Default Re: I Got Me A MERV

    I ran it yesterday on two traxxas power 6 cell packs, all I got to say is

    When they say 50mph out of the box with series adaptor and 2 packs they wernt kidding.
    Also I would have never figured it would do standing back flips, only did it two times intensionally because I know its not going to be good for it but I was shocked, this little thing is crazy.

    Shelf Queens Are For Sissies
    BRUSHLESS RIPPS, NITRO DRIPPS

  7. #7
    Join Date
    Mar 2010
    Location
    Ohio
    Posts
    215

    Default Re: I Got Me A MERV

    Hey larry, Im kinda new to the hobby, and grabbed my MERV after Xmas. The susp. as you knoticed needed upgraded. You have the exact setup I have. Just my 2cents here, add ball bearings to the rockers. Smoooth..... I also added bearings on my steering post. Well worth another $5. Plastic there to if ya ain't knoticed. Darn Traxxas slippin plastic in on us..lol.. Check out TheToyz! GPM Alum. steering/tie rod set 9pcs. ,$23 !! I've also read the a-arms are a weak point as well, and grabbed RPM f/r sets. Rammed post at 40+mph and "tough"! They also took out the little slop that was there. Only $12-13 set, upper and lower. I know you'll love that little devil. It's wicked fast, as you knoticed! 1 more thing, Check out AutoMizzi on ebay. He also has an off ebay store(I forget the site's name) as well. You can get 2 1500mAh EP packs for under $30. They are bad ! 30A continuos, and run quit a bit longer than stock packs. I can run 2 in series for 20+min. and take the truck in befor battery dies. Im just lettin you in on the few little things I've found since Jan.. Hope you can use some of this bud.

  8. #8
    Join Date
    Jul 2007
    Location
    The Hills Of Maine
    Posts
    1,209

    Default Re: I Got Me A MERV

    Quote Originally Posted by cika View Post
    Hey larry, Im kinda new to the hobby, and grabbed my MERV after Xmas. The susp. as you knoticed needed upgraded. You have the exact setup I have. Just my 2cents here, add ball bearings to the rockers. Smoooth..... I also added bearings on my steering post. Well worth another $5. Plastic there to if ya ain't knoticed. Darn Traxxas slippin plastic in on us..lol.. Check out TheToyz! GPM Alum. steering/tie rod set 9pcs. ,$23 !! I've also read the a-arms are a weak point as well, and grabbed RPM f/r sets. Rammed post at 40+mph and "tough"! They also took out the little slop that was there. Only $12-13 set, upper and lower. I know you'll love that little devil. It's wicked fast, as you knoticed! 1 more thing, Check out AutoMizzi on ebay. He also has an off ebay store(I forget the site's name) as well. You can get 2 1500mAh EP packs for under $30. They are bad ! 30A continuos, and run quit a bit longer than stock packs. I can run 2 in series for 20+min. and take the truck in befor battery dies. Im just lettin you in on the few little things I've found since Jan.. Hope you can use some of this bud.
    Welcome to the hobby and RCJ.
    Ya its a pretty cool little truck, and they do need some upgrades, but I had no intensions of upgrading it to start with.
    I paint RC bodies and was offered the upgrades to do a paint job for some one.
    Will it get more upgrades, I doubt it, needs new wing mount so I can put wing back on but thats probably about as far as it will go, unless I get offers of parts I can't refuse.
    Its a pretty cool little truck, changed my outlook of mini's as the mini's I've had in the past were a fail (too slow, too weak)
    I been in the hobby for 30+ years and had 1000's of rc's, usually upgrade and sell or trade them off.
    I got the MERV in trade of my SuperPede, I had over $600.00 in that build, took out electronics and traded it off after getting it to where there really wasn't any upgrading left
    to possably do.
    Thanks for your advice but not really sure how long it will be around, they don't stay in my shop long before I get bored with them.

    Shelf Queens Are For Sissies
    BRUSHLESS RIPPS, NITRO DRIPPS

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts