CLICK HERE FOR RC's PARTS LISTED ON EBAY
Looking for something?
Im looking to buy many Mini and Micro T's. I am willing to buy them broke or needing parts also. I am looking for about 15 of each no joke.... I'd like to get em at good deals. My wife is going to use them in her class at school. She teaches 1st graders and were looking to buy a few of these....
Micro 3 wire servo (for micro t) http://www.losipartshouse.com/servlet/the-32476/ASC29222-XP-TRS401-dsh-SS-2.4GHz/Detail x2 rc10t3 aftermarket stuff rc18r aftermarked stuff mabey micro t aftermarket stuff dependiing on what it is
i need parts for a can matrix r2 got the bx pro digital control to trade for some parts thanks for looking
im needen a losi highroller anyone got any, it cn c be a roller
I have a big block conversion kit on a Traxxas T-maxx 3/3 and need the front and rear CENTER CVD's, they are made by Dynamite and possibly some others, the Dynamite P/N is DYN7413,,,,,,,,,please email me at no1rick@gmail.com /I]
Im looking for a nitro motor for my mt2 let me know what you got .My 3.3 traxxas motor blew the connecting rod and Im also looking for a piston ,sleeve, and connecting rod for it .Thanks Dean :D
I am looking for Spektrum SR3000 Receiver. Any help would be great!!! I have paypal Thanks!!!! Bill
Would like a decent condition Slash/Pede tranny for a build... Lemme know what you got guys!
hey guys im looking for anything mini lst2 has for electronics please let me know what u have thanks.
Once again I'm here in all hopes that someone might be able to help me locate or perhapse be looking to part with a SKI-DOO MXZ R/C Snowmobile. I had one of these sleds a couple years back but unfortunately had to part with it due to a couple other on going projects at the same time that needed...
im looking for a berg what u got spec and pics hear or marcuswelch3@yahoo.com artr or roller dont need a radio.. thanks marcus
wanting to get into crawling, looking for something low cost yet able to be upgraded. anyone have an old dusty roller they wana get rid of? thnx, Carl
looking for a multi-model transimitter/rx combo. +servo is great, prefer something new-ish (not dis-continued) and possibly digital. LMK if any of you have something lying around, or if you could reccommend a reasonable model. I mainly bash, but will prob. race eventually............... tnx in adv
looking for the gears on a hobby zone champ or the whole esc that includes the servos
Hey all I am needing a single SR3000 Reciever (I already got DX2.0 transmitter). Let me know if you got one and how much , payment will be by paypal
well, i'm looking for a nitro 4tec 2.5r or better for a friend of mine, looking to get mostly stock, this is his first descent rc that he's looking for. def wanna spend like under 200 on it. up next, i'm doing a scaler of sorts, and i really REALLY need a honda civic hatchback body, if not a...
Just like the title says.No junk.
i need a recevier for a JR Racing XR 2 and crystals too thanks daniel
have cash,paypal,moneyorder,trades, lipos,chargers,1/10 brushless motors,rc10 rollers etc,just let me know .thanks
I just got a tmaxx 2.5. I am needing a bigger motor, upgrade and alum parts. I would like to do alum towers, big bore shocks and rpm arms to start with. Then an upgraded fuel tank, motor, ect... If you have anything i could use, please let me know. I would like a 3.3 maybe something bigger?...
Please let me know if you have a grp .12 Con Rod that you would be willing to sell Thanks Bob
I am looking for the following items: I need a 2.4ghz traxxas tx/rx combo New or barely used revo brushless edition body 2 new or barely used 3s lipo's...prefer 5000mah or higher...something around 30c 11.1v I have a new in box psp-3000 to trade for one or all of these items. The...
Hey guys, just like title says, I need a Traxxas vxl esc. preferrably the waterproof vxl3s but the older one would be ok as well. I have cash but not a lot. Just pm me with what you have. I would be willing to entertain other offers of other brands but I need at least 3S 35C capability. Please...
Hey there, I'm looking for a set of tires for my tmaxx 3.3. the hex size is 17mm. can anyone help me out? I live in Vancouver. if there's any locals, that be even better.
If you don't want them I can use them. New or used. .010 to .15 etc. Joe jsesere@yahoo.com
I'm looking for a Blackfoot (may be Super Blackfoot '89-96 F150 bodystyle) hard body with all chrome and glass? Can't seem to find one on Ebay or anywhere. I don't want the Blackfoot Extreme as it has a hood scoop I'm not crazy about. Also looking for a set of rims from the Tamiya Ford Lightning...
i am giving my nephew and his dad couple rc10t3's to fix up, both are in good shape just need a good tune up like shocks and bodies. well: i have everything except a charger for the NON-LITHIUM batteries. so if you have a old one please let me know. i would like to find a peak charger but...
I need a 1/16th scale VXL or Castle ESC. I have cash or a few 7 and 8 cell nihm batteries and Duratrax digital nihm charger for trade
This is an inquiry about T3 parts/rollers/etc. A friend has just purchased 2 and I currently have 3. We have no lhs, so we're figuring to have some spare parts/a roller on hand just incase. (I'm building a track so I'm sure something is going to break at some point.) If you have something to part...
Ok, after i buying a brand new esc for my slash, because i thought the new one i bought broke the first run, i tried it and it turns out its the motor. So i wasted $50 for nothing, and im really not happy now. I need a 1/10th scale bl motor, sensorless or sensored, doesnt matter. vxl, novak...
I am looking to buy or trade for a li-po balance charger. It needs to be able to charge and balance at least 3000mah 3s batts. Looking in the $30 plus range for a used one. Something simple and easy to operate.
hey i really need some rear end parts for my jammin truggy. i might be interested in a whole truck, a roller, or just some misc parts for it. thanks , ~Josh
I need a battery charger capable of charging 10 cell nimh batteries. Li-po capability would be great but not necessary. NOT lookin for a new one, I'm on a serious low budget here guys so if you have one you can sacrifice for a decent price then let me know what you have.
Doh! I know hard to find, but maybe someone here might have one for sale!
I'm looking for a finned brushless motor that has the whole number turns (9t, 10t, 12t 13t etc) NOT the half turn size (8.5 13.5). I have an ezrun 35A esc and it cogs with full 540 size motors. I need the finned 540 size (380 size made to be 540 size). I'd prefer a trade. I have a traxxas...
Ok boys n girls I have a new project going and the 2.2 don't look good So I'm looking to trade my beadlocks for 1.9 with tires If you have what I'm looking for please post here As far as trades go I will not ship first I can do same time
Hey guys, i need a .15 pullstart for my onroad.Preferably with cord and bearing and everything.Lmk if ya have one, thanks.:D
Im looking for a Futaba T3pg radio complete or the battery box only working or not. PM if you have one.
not looking for anything new just like to have a couple spare sets just in case i dont have much money to spend but i have a few things i could trade? i have two laptops that need some tlc one needs a new hard drive and the other needs a mother board also have a a set of used tmaxx 1.5 a...
i need batteries with the regular plugs would rather buy in groups got $50 to spend
If you don't want them I will buy them.
I need a brushless esc. I have had outstanding luck here getting what I needed for a fair price. So please help me out. I am running a traxxas vxl motor in a vxl pede. New trade acquisition thanks to Lanakila...he hooked it up for me. So people please help if you can.
I need a new bl system for my slash...The brand new one from hk gave out on me.Dnot know if the motor and or esc went, so im lookin to get a system.Want a vxl, but will take novac or whatever you have. http://www.rcjunkyard.com/forums/showthread.php?19342-For-trade-a-few-helis. Thats what i...
You all found the last manual I needed in record time, I'm hoping for a repeat. I have googled and Bing'd to no avail. Thanks in advance.
Just curious if anyone has a spare body from the original clodbuster. The Hard plastic one. I need the cody, window plastic, tailgate, simulated engine, and grill. Let me know.
will trade lipos or pay with paypal thanks.......roger
I got it as part of a larger deal and I'm not sure how to program it. It is a XR3 model. A link to a pdf of the manual would be great or any other type of copy for that matter.
looking for a used hpi 4.6 crank, let me know what you have thanks arick
need a small block engine prefer a traxxas because I already the header required for it. If you have one (traxxas) or another small block with the round exhaust let me know. Must be in good running condition. Its for an old stampede for my 4 year old so I cant justify a new engine just for her...
looking for a pede trans i need tlt axles spektrum sr3000 reciever narrowed wheeld and true scale tires scale accessories
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
