T-maxx 2.5 and 3.3 parts

[r_gillies]

Hey guys i was wondering what parts are interchangable from the 3.3 back to the 2.5. I was thinking about the batterybox and hump pack. Thanks!

[kdz76]

pretty much everything on a 3.3 is the same as a 2.5 other then the tranny the only difference i have found on parts is they are gray insted of black. I have had to replace bulkheads chassis supports and a arms and they have all been the same size just different color

[r_gillies]

Are the axels and bearing carriers the same. I was looking on ebay for parts and they look different. Do they use the same bearings?

[kdz76]

ok direct from traxxas the part exploded diagram looks exactly the same to me for the 3.3 found here http://www.traxxas.com/products/nitro/maxx/tmaxx33/blueprints/070327_tmaxx33_front.pdf as the 2.5 which can be found here http://www.traxxas.com/products/nitro/maxx/tmaxx25r/blueprints/060215_tmaxx25r_front.pdf same can be found for rear best thing to do is to go to traxxas.com and check it out for your self

[r_gillies]

Thanks but i have the old 2.5 not 2.5R. My parts are different from the R and the 3.3.

[zueslilbuddy]

Thanks but i have the old 2.5 not 2.5R. My parts are different from the R and the 3.3.

Your rite the 2.5r/3.3 is different than the 2.5.
the 2.5r/3.3 runs the heavier shafts anf heavier steering knuckles but you can use them on the 2.5 if you use the shafts and the knuckles, and yes the bearings are different.

[redrumdarula]

the brakes are also different from the r and 3.3 and the 2.5 non r