PDA

View Full Version : Parted out EMAXX some is free



jmrsoup
03-25-2007, 06:01 AM
Whole lotta stuff. Prices listed include shipping and most of them are a little above 1/2 of what the current prices are.

ELECTRONICS
Charger- TLP EXPRO II new $30

Batterypacks (2)- ITZ 7 cell racing 3300mAh NEw $50

batterypacks (2)- Pro-match 7 cell 3300mAh Pretty used $20

stickpack- Intellect 6 cell 4200mAh New $50

stickpack- Trinity 6 cell 4200mAh "VIS powered" New $25

Deans- 4' each of red/black 12gauge ultra wire new $5
(2) Two packs Female ultra plugs new $4
(1) Two pack Male ultra plugs new $3

receiver pack- Hydrimax Ultra 6v 1650mAh pretty used $10

Radio- Hitec Aggressor 3channel FM 75.990 CH90 crystals used $40

receiver- Hitec 3channel FM microreceiver. HFS-03mm new $20

receiver and receiver pack covers- R/C raven new $5

Hitec ultra torque servo HS-645MG new $20

JR shift servo NES-513 used $20

Power switch with wiring shipping cost
HARDWARE
OFNA hex wrench metric ratchet tool (look at towerhobbies.com) new $15

(2) 10 packs Racers edge blue "easy grip" truck body clips new $4

(2) 10 packs Traxxas body foams (keep posts from rubbing paint) new $2

Steering servo skid plate- RcRaven, red powdercoated new $7

Steering servo skid plate- NewEraModels, silver new $7

Center skid plate- Integy type II, red new $10

Pinion gears- (1)32 pitch/22T (1)32 pitch/9T new $7

Shocks- Integy MSR4 red aluminum w/ piggybacks. have dark blue springs on them used, but don't show wear $50

Shock towers w/ body mount hardware-silver,aluminum front and back
used, couple scratches $20
Suspension arms (8) 4 upper/4 lower. silver alum. couple scratches $70

Bumpers- front and rear silver chrome. couple scratches $10

2 stock differentials dirty but work well

Bulkhead- Integy (front) silver, aluminum couple scratches $20

Bulkhead- stock (rear) one of the holes is ripped out whatver shipping is

Bumper supports- front and back stock whatever shipping is

Skid plates- Front+back silver chrome. Both have one hole ripped out (happened when i was taking truck apart and screws got stuck in place)
price of shipping
2 stock bulkhead braces $3

2 support braces silver,aluminum $5 couple scratches

Antenna base (screw assembly to anchor the antenna to chassis) $5

Steering blocks- 3 are integy blue alum. and 1 is a blue/green alum. (not sure what company) couple scratches $40

Drive shafts, stock shipping

Tie rods, stock metal ones shipping

Wheel hubs- blue/green aluminum $10 used, not worn

Transmission Stock tell me how much it cost

Chassis braces- silver aluminum couple scratches $15

Motor / Speed control / accessories / other

Feigao Brushless 540L9T (like hacker motors, but less $) used $50

Heat sinks- (2) blue aluminum used, not worn $10
Schulze future-58Co speed control. For brushless. tell me how much it cost

Motor plate- Blue aluminum. used $5

slipper kit (has blue aluminum plate next to spur gear) i don't know what kit this is used $?

Custom chassis. looks like it's made of plexiglass lotsa scratches $30

Wheels and Tires - Maximizer purple beadlocks (4) (one is dyed red.) $20
Imex Swamp Dawg tires (4)used, look like no wear $20

Body- Atomik F-350. silver w/blue flames. Has carbon fiber on bed like a tonneau cover. Scratched up $20

Let me know if any of these prices are way off or if you can give me a ballpark figure for the things that don't have prices.

mutanTmaXX
03-25-2007, 06:19 AM
Heres what I want pics of:
batterypacks (2)- Pro-match 7 cell 3300mAh Pretty used $20
stickpack- Trinity 6 cell 4200mAh "VIS powered" New $25
receiver pack- Hydrimax Ultra 6v 1650mAh pretty used $10
Radio- Hitec Aggressor 3channel FM 75.990 CH90 crystals used $40
receiver- Hitec 3channel FM microreceiver. HFS-03mm new $20
Hitec ultra torque servo HS-645MG new $20
Power switch with wiring shipping cost
Shocks- Integy MSR4 red aluminum w/ piggybacks. have dark blue springs on them used, but don't show wear $50
Suspension arms ( 4 upper/4 lower. silver alum. couple scratches $70
Transmission Stock tell me how much it cost $25
Chassis braces- silver aluminum couple scratches $15
Custom chassis. looks like it's made of plexiglass lotsa scratches $30
Wheels and Tires - Maximizer purple beadlocks (4) (one is dyed red.) $20
Imex Swamp Dawg tires (4)used, look like no wear $20
Body- Atomik F-350. silver w/blue flames. Has carbon fiber on bed like a tonneau cover. Scratched up $20

ljparton
03-25-2007, 09:34 AM
I will buy the Feigao Brushless Motor and the Schulze Speed Control, along with the Integy Shocks, send pics to cjparton@netzero.net if you have them, also, what top speed did you get with the brushless set-up?

rcheadcrazy
03-25-2007, 12:49 PM
sent u a pm

cpee
03-25-2007, 02:05 PM
van i have pics of all alum parts please and bulk price thanks chris cpulido@bellsouth.net

HPIownage
03-25-2007, 04:28 PM
piggy back shocks, stock differentials, drive shafts, Transmission, slipper kit, center skid plate integy type II, body clips, hitec receiver and radio. how much for all that shipped to "92591 zip code" let me know ASAP need parts for my e maxx

jessejoe23
03-25-2007, 06:22 PM
Hey i need the diffs.gimme a price and ill probly take them as I just blew up the rear diff in my tmaxx

Big Zig
03-26-2007, 04:00 AM
are the beadlocks gone yet ? bigzigrock33@aol.com

jmrsoup
03-26-2007, 05:13 AM
If you want pics go to photobucket.com log in as "jmrsoup" and use password "john". This is a view-only login. Choose the "EMAXX for sale" subcategory.

MDREVO
03-26-2007, 09:27 AM
25 for the steering blocks?

jmrsoup
03-26-2007, 03:54 PM
The DIFFS, BEADLOCKS, SHOCKS, TIRES are gone already

jmrsoup
03-26-2007, 04:20 PM
Can someone tell me what these are?
http://i71.photobucket.com/albums/i133/jmrsoup/unknown%20parts/IMG_2669.jpg
http://i71.photobucket.com/albums/i133/jmrsoup/unknown%20parts/IMG_2670.jpg

94lightning
03-30-2007, 12:26 PM
got the tires today,this guy is A+

jato 4 life
04-05-2007, 09:23 PM
how much for piggy backs?

jato 4 life
04-05-2007, 09:29 PM
also how much for the bumper with the lights?

jmrsoup
04-07-2007, 06:41 PM
everything except the following has already been sold:
Receiver Battery pretty used $5
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2607.jpg
Custom-made clear chassis used and a bit scratched $20
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2701.jpg
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2706-1.jpg
Body used, the usual rub marks on top, some scratches, look cool and has a carbon fiber tonneau cover. $10
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2676.jpg
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2682.jpg
Integy center skid plate brand new in packaging $10
http://i71.photobucket.com/albums/i133/jmrsoup/EMAXX%20for%20sale/IMG_2623.jpg

TERBObob
04-07-2007, 08:09 PM
I'll take the following ...
PAYPAL ok ?

Hitec ultra torque servo HS-645MG new $20
Power switch with wiring shipping cost

let me know....

jmrsoup
04-07-2007, 09:57 PM
TERBObob :
Look at the post right above yours to see what's left.

toniceguy55
04-19-2007, 02:39 PM
you still have the servo

jmrsoup
04-19-2007, 09:22 PM
no servo left