mrwrenchus
06-12-2011, 01:09 PM
Ok here is a Almost New Raptor .30 V2. This is Ready to Fly Just needs Fuel and Starter hex shaft and your own Glow igniter.
OK heres the run down on Heli components.
1. Thunder Tiger Raptor 30 V2 RTF
2. JR XP622 Radio with JR Sport RS600 both on channel 58
3. Futaba GY401 Gyro with a JR DS821 Digital Tail Servo
4, Throttle is a Futaba S3004
5. Pitch Servo is a Futaba S3151
6. Aileron Servo is a Futaba S3151
7. Elevator Servo is a Futaba S3151
8. Mavrikk ( 550mm ) Carbon Fiber Blades
9. OS. MAX SX .32 Nitro Engine with Single piece Heli Pipe and Align Exhaust Deflector
10. Remote Glo plug igniter.
This Helicopter has only had 3 tanks of fuel through it and is in Like Brand New Condition. It has only been flown sport and has never been ran hard for 3D manuvers. I keep my Helis Clean and well in order. The Canopy has normal signs of use a small hole in the windshield but that does not change flight at all in any way. There are 2 smalls hole drilled in the left side rear of the frame that I use to mount my Camera on the Heli. The hole does not in any way change the structer integrity of the frame. I am also including a link to video for this Helicopter so you can see it runs and Flys Beautifully.
First $450.00 payment cleared Gets it.
Please send payment too Paypal @ mrwrenchus@hotmail.com .... Please send as Gift so Paypal fees are in required.
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0238.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0239.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0240.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0241.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0242.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/th_Raptor30V2.jpg (http://s1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/?action=view¤t=Raptor30V2.mp4)
OK heres the run down on Heli components.
1. Thunder Tiger Raptor 30 V2 RTF
2. JR XP622 Radio with JR Sport RS600 both on channel 58
3. Futaba GY401 Gyro with a JR DS821 Digital Tail Servo
4, Throttle is a Futaba S3004
5. Pitch Servo is a Futaba S3151
6. Aileron Servo is a Futaba S3151
7. Elevator Servo is a Futaba S3151
8. Mavrikk ( 550mm ) Carbon Fiber Blades
9. OS. MAX SX .32 Nitro Engine with Single piece Heli Pipe and Align Exhaust Deflector
10. Remote Glo plug igniter.
This Helicopter has only had 3 tanks of fuel through it and is in Like Brand New Condition. It has only been flown sport and has never been ran hard for 3D manuvers. I keep my Helis Clean and well in order. The Canopy has normal signs of use a small hole in the windshield but that does not change flight at all in any way. There are 2 smalls hole drilled in the left side rear of the frame that I use to mount my Camera on the Heli. The hole does not in any way change the structer integrity of the frame. I am also including a link to video for this Helicopter so you can see it runs and Flys Beautifully.
First $450.00 payment cleared Gets it.
Please send payment too Paypal @ mrwrenchus@hotmail.com .... Please send as Gift so Paypal fees are in required.
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0238.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0239.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0240.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0241.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/100_0242.jpg
http://i1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/th_Raptor30V2.jpg (http://s1204.photobucket.com/albums/bb417/Mrwrenchus/Raptor%2030/?action=view¤t=Raptor30V2.mp4)