PDA

View Full Version : Hover Craft of Unknown Origins..



marderman
05-31-2005, 07:38 AM
I have forsale a Large Nitro powered Hovercraft.

She Measures Approx 2.5 feet by 1.5 feet. It currently has a .61 motor installed.

The hull is in two sections, the upper holding the motor/prop and radio gear etc and the bottom holds the skirt. The skirt is in good condition and its design makes it easy to replace sections if they get damaged.

The body has recieved some serious abuse of the years, and then some serious bodges by people who didnt know how to fix fiberglass. When i bought it i cut out all the damage and remade and replaced lots of body work.. she now just needs sanding and painting..

I have fired her up a few times, but the prop that is currently fitted does not generate enough thrust to make her move. she will only just hover and inflate the skirt. I think a prop that has not been cut down by some animal will do the trick as would a ducted fan unit.

I have just bought an off shore power boat with a 26cc powerplant so need to raise some funds.. So it is with regret that this project craft is now up forsale.

I have plenty of pictures and can take more for you so you can see what you buying if required. email me or post below for more info.

tom_martin75@hotmail.com

marderman
06-07-2005, 07:55 AM
She is on Ebay now. With pics etc

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5980074550&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

marderman
06-13-2005, 05:36 AM
Hovercraft is now sold.

£132