7.7 cen, savage x roller, cen parts, savage parts CHEAP

[dancomer]

First i have to say best offer on everything, need money for a new charger, i prefer to sell, can work trades if i need something.

First time on the block is a Cen 7.7 motor, has been used for about a gallon, tons of compression, has everything on it but needs a clutch bell. Everything else is good to go.

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs043.snc3/13042_1259916610452_1005757624_30805729_2438418_n. jpg

let me know if you want more pics. top of the motor is great, no scratches at all, also comes with motor mount and screws. asking 145 shipped OBO

NEXT up is the almost complete center driveline of a cen 7.7
comes with the rear and front diffs, bulk heads, shock towers, no arms or axle shafts, and missing one drive shaft.
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs063.snc3/13042_1259916650453_1005757624_30805730_7242408_n. jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs063.snc3/13042_1259916690454_1005757624_30805731_7787256_n. jpg

i am asking 90 including shipping OBO

NEXT is a cen full radio setup, no rx or tx, just the servos, trays, battery holder, switch, 3 servos, linkage, arms, pretty much complete
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs063.snc3/13042_1259916810457_1005757624_30805733_7583619_n. jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs043.snc3/13042_1259916850458_1005757624_30805734_3957764_n. jpg

asking 65 shipped OBO


next is the cen fuel tank with some fuel line asking 15 shipped
http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs043.snc3/13042_1259916890459_1005757624_30805735_689643_n.j pg


next is the front upper, lower arms, caster blocks, and steering assembly
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs043.snc3/13042_1259917010462_1005757624_30805737_6668695_n. jpg
asking 35 shipped OBO

CEN Chassis plates
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs063.snc3/13042_1259917050463_1005757624_30805738_7559388_n. jpg
asking 22 shipped OBO



savage fuel tank with lines and filter, and mounts, tank had one filling.
asking 13 shipped
http://hphotos-snc3.fbcdn.net/hs043.snc3/13042_1259917170466_1005757624_30805741_7937999_n. jpg

this stuff needs to go, feel free to call me day or night but i am looking to move most to all of this ASAP.

847-975-7448

Daniel

[dancomer]

NEXT UP IS A Savage X roller?
no trans, no motor plate (unless you want the 4.6 also for sale as well)
does come with the drive axles to the trans, diffs are a ? i dont remember if they are good or not, im pretty sure they are. body posts are included
bumper supports are not there but i might have them.
comes with the exhaust
ASKING 100 SHipped sorta firm......?
http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs063.snc3/13042_1259917090464_1005757624_30805739_7403246_n. jpg

this is my 4.6 motor, needs 1 way bearing, its roto start, needs a carb holding pin, ran fine but might be just for parts, comes with motor mounts and motor plate, and cross bars. has complete clutch and bell.
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs043.snc3/13042_1259917210467_1005757624_30805742_6624479_n. jpg
asking 55 shipped

[inferno]

do you have any high torque servos 200oz or better???

[dancomer]

yes but they need to be rebuilt

i have a tower pro 995

a few hitecs 645mg's

hitec 5645mg

aso have the cen electronics which are in the 170-200 range

[inferno]

the hitec servos all have to be rebuilt?????

[dancomer]

all but my 645mg and a 805bb 344oz/in of torque

cen electronics are good to go as well

[inferno]

all but my 645mg and a 805bb 344oz/in of torque

cen electronics are good to go as well
how much for these 2???

[dancomer]

the 805 is 1/4 and i want 50 shipped for it, been used a couple of times

645 for 24 shipped via paypal gift so i dont get hit with fees

[inferno]

the 805 is 1/4 and i want 50 shipped for it, been used a couple of times

645 for 24 shipped via paypal gift so i dont get hit with fees
where are you located??? i dont use paypal i use postol moneyorders, i may be interested in the 645, mike

[dancomer]

in chicago area