bilsue2005
05-18-2009, 06:27 AM
What I have is a very stable 450s silver carbon edition ready to fly with dx6i and blade 400 arf and lipo's and a bunch of extra's
1- T-rex 450s- with
hs-65mg's on the cyclic and an
hs-81 on the tail.
Allign 500X gyro
align 325mm carbon blades.
extra align 3550kv motor
Fusno Fiberglass Canopy will also include a painted stock canopy
Spektrum DX6i (had it sent to horizon for the recall and it works great now)
AR 6100 RX (installed)
AR6000 RX also included Brand new in the package
Align 450 Alu. Case
Thunder power 2100 3 cell lipo
high speed tail upgrade (installed) 2 stock gears/shafts included
I also have an align alum. hs1080 main rotor housing (never installed)
blade 400 arf,
4 hs-65hd servo's
e-flight duel rate gyro,
ar-6100e rx,
e-flight 1800mah 3 cell lipo,
stock wood blades
carbon fiber blades (one blade has a nick in it)
Fusno canopy + the stock painted one
nip canopy mounts
nip landing gears + Struts
The e-flight charger and power supply
poly charge 4
with all the adapters (every adapter plug for 2/3cell lipo's)
3 equanox balancer's
4 volt meter's with deans installed
I will also throw in the cpu power supply that I use for a dc power supply.
The blade 400 needs a feathering shaft and a tail boom and the main rotor housing can be repaired. thats it. As far as the blade 400 I spun it up and it tumbled over (hung up in the grass.) the blades struck the tail boom and thats it. very repairable. the main shaft is fine.
650.00 and 25.00 shipping to yhr lower 48
Call me at (931) 639-3684 for any questions you may have or e-mail me at bilsue2005@bellsouth.net (bilsue2005@bellsouth.net)
1- T-rex 450s- with
hs-65mg's on the cyclic and an
hs-81 on the tail.
Allign 500X gyro
align 325mm carbon blades.
extra align 3550kv motor
Fusno Fiberglass Canopy will also include a painted stock canopy
Spektrum DX6i (had it sent to horizon for the recall and it works great now)
AR 6100 RX (installed)
AR6000 RX also included Brand new in the package
Align 450 Alu. Case
Thunder power 2100 3 cell lipo
high speed tail upgrade (installed) 2 stock gears/shafts included
I also have an align alum. hs1080 main rotor housing (never installed)
blade 400 arf,
4 hs-65hd servo's
e-flight duel rate gyro,
ar-6100e rx,
e-flight 1800mah 3 cell lipo,
stock wood blades
carbon fiber blades (one blade has a nick in it)
Fusno canopy + the stock painted one
nip canopy mounts
nip landing gears + Struts
The e-flight charger and power supply
poly charge 4
with all the adapters (every adapter plug for 2/3cell lipo's)
3 equanox balancer's
4 volt meter's with deans installed
I will also throw in the cpu power supply that I use for a dc power supply.
The blade 400 needs a feathering shaft and a tail boom and the main rotor housing can be repaired. thats it. As far as the blade 400 I spun it up and it tumbled over (hung up in the grass.) the blades struck the tail boom and thats it. very repairable. the main shaft is fine.
650.00 and 25.00 shipping to yhr lower 48
Call me at (931) 639-3684 for any questions you may have or e-mail me at bilsue2005@bellsouth.net (bilsue2005@bellsouth.net)