Dual Brushless E-Warhead

[Takedown]

I ditched the idea of using outrunner DD on my warhead due to complication's with the mount setup and the lack of proper component's so here is my new idea... I plan to use an E-savage tranny that I bought from my friend and mount it on the custom .30in plexiglass mount/skidplate I made for the warhead . I never hear any issue's with e-savy tranny's and I plan to put mine to its limit's and beyond by running dual brushless motors on it on seperate 3s lipo battery's with dual MM ESC's. I am looking into dual 37/48 1000kv outrunners or something fairly on the cheaper side for proper power output that I'm expecting and a ton of overall power. I most likely have my mind set on the outrunners due to their torque and their overall power output. I know running dual motors on one tranny or r/c isnt smart because of different rotating speeds but Im gonna give it a shot. I plan to get this started ASAP. Pics will be taken also.

[Takedown]

Good news... I finally got around to ordering the motor's and I took a gamble. I am one of the first to try this if not the first and Im hoping it turns out w/o issues. I ordered two 37/48 outrunners from HobbyCity. Their suppose to be direct mounting to the motor plate. When they get here Ill post pics.

[Takedown]

More Good News... Im hopefully going to pick up my Warhead along with the Matrix (http://www.rcuniverse.com/buynow/keywordclick.cfm?bid_id=3011) TR and the E-Maxx (http://www.rcuniverse.com/buynow/keywordclick.cfm?bid_id=6153) today. We had a major flood 2 weeks ago and had to get alot of stuff out of the house so we put it in storage. Well now that the flood threat has gone down a little Im probably going to pick up all my R/C stuff from storage today. When I do, Ill let you guys know.

[Takedown]

Here are some pics of the modded tranny... Im now using a Savage mod1 spur and 24t mod1 pinions. The mounts are .30in plexiglass. It will mount directly unto the bottom chassis plate on the Warhead.

http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture006.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture003.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture002.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture001.jpg

[M3mph1s]

Lookin prettysweet. With dual outrunners, I'm sure you'll haveplanty of torque, which also means you can gear up!

[Takedown]

Yep I plan to gear it with mod1 setup instead of 32p. I will be gearing it at 25/49 to start.

[Takedown]

Ok here are the pics of it so far... Dont mind the battery tray. Looks kinda lame were its at right now.
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture108.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture110.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture111.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture112.jpg
http://i301.photobucket.com/albums/nn70/TakedownRCU/Picture113.jpg